hslite.blogg.se - Red alert 2 random serial number class 2000

#RED ALERT 2 RANDOM SERIAL NUMBER CLASS 2000 HOW TO#
#RED ALERT 2 RANDOM SERIAL NUMBER CLASS 2000 DRIVER#

In that case, logging in is possible by pressing the "Enter" key when prompted for a username and password. In the initial state, a username and password have not been specified. Immediately after startup, the following is displayed on the serial console screen. The unit takes approximately 60 seconds to start up.

#RED ALERT 2 RANDOM SERIAL NUMBER CLASS 2000 DRIVER#

The Yamaha Network Device USB Serial Driver Installation Guide and the installer can be downloaded from the following website.

#RED ALERT 2 RANDOM SERIAL NUMBER CLASS 2000 HOW TO#

For details on how to install the USB serial driver, refer to "Yamaha Network Device USB Serial Driver Installation Guide.".

A USB serial driver must be installed before the mini-USB CONSOLE port can be used.

Use a USB cable or an RJ-45/DB-9 console cable (YRC-RJ45) to connect a computer to the product.

Baud rate: 9600 bps (default setting is 9600 bps, which can be changed using commands).

Terminal software is also needed for controlling the computer serial (COM) port.Ĭonfigure communication settings for the CONSOLE terminal as follows. Use a USB cable that supports data transfer via both a USB Type A connector and a mini-USB Type B (5-pin) connector to connect to the mini-USB CONSOLE port. If specifying settings via the CONSOLE port, use a USB cable or RJ-45/DB-9 console cable (YRC-RJ45).

Prepare the computer and other items needed for specifying settings.

Preparation for Specifying Settings via the CONSOLE Port

Specify settings by executing commands using SSH.

Specify settings by executing commands using Telnet.

Specify settings by executing commands using the CONSOLE port.

Settings for the SWX3220 series can be specified using any of the following four methods. This guide describes the setup procedure up to the point SWX3220 series settings can start being specified. Thank you for purchasing a Yamaha SWX3220 series switch.īefore using the product, be sure to read this manual carefully to ensure the product is installed and settings are configured properly.īe sure to observe the warnings and cautions indicated in this manual and use the product correctly and safely.